FCSI 3x ActiveNS slurry additive - additive to slurry, natural product

Manure additive ActiveNS brings more energy with less odour

Now available in a 3-pack: 3x 10.2kg ActiveNS

Active NS is a pure natural product used in slurry tanks to both create a more homogeneous slurry and allow better, easier mixing of the sediment and floating layer.

The benefits of a slurry additive for agriculture:

• ActiveNS slurry additive binds up to 1.2 kg NH³ per tonne of slurry
• More homogeneous mass
• ActiveNS slurry additive reduces the floating layer on the slurry tank
• Easier handling of slurry with ActiveNS
• ActiveNS reduces odour & binds NH³
• ActiveNS facilitates work processes
• ActiveNS only needs to be stirred once within 24 hours

These are the benefits of using Active NS slurry additive for biogas production:

• Increases gas production by up to 10%.
• The biomass is easier to stir
• Less sedimentation in the production tank
• Stirring in the pre- and storage tanks is easier
• Floating layer on the storage tanks
• Odour from the storage tanks is reduced
• More fertiliser available for crops

Application in channels and in the pre-tank

Add 20 g Active NS per m3 to the slurry in the pre-tank and stir vigorously before pumping the slurry into the storage tank. If Active NS is used continuously, regularly add 20 g Active NS per m3 of slurry added since the last treatment. Stir before pumping the slurry into the storage tank.

Application to storage tanks

Use 20 g Active NS per m3 of slurry in the storage tank. Add Active NS before or at the same time as stirring the storage tank. Poke a hole in the floating layer with the agitator if a floating layer has formed on the storage tank. Pour in Active NS directly at the agitator to ensure that Active NS is immediately thoroughly mixed with the slurry. This gives the best effect. This is how Active NS Active works.

Active NS relaxes the slurry and binds a certain amount of the ammonia in the slurry. This makes it easier to mix the sediment and the floating layer into a more homogeneous mass, which remains liquid for up to 24 hours after stirring. It should be stirred every 24 hours to ensure that the full effect is achieved.