Göbel Frost protection heating cable 12 m with thermostat

Frost protection heating cable 14 m with thermostat

Frost protection heating cable

Length: 14m

Power:224 Watt,

power connection:230 Volt (with thermostat)

• keeps your water pipe guaranteed frost-free
• built-in thermostat works independently
• tested VDE-safety
• do not install in the browsing area of animals - only use 24 volt heating cables here
• not suitable for heating pipes
• in case of additional insulation, do not insulate the thermostat as well
• Protect the area that the animals can nibble on with a bite guard
• IPX7
• Made in EU
• prevent freezing of water pipes
• Thermostat in the heating cable switches the cable on automatically

What is to be considered with 230 V heating cables:
- always attach the heating cable to the underside of the pipe
- the water pipe must be earthed
- the 230 V heating cables must be plugged in and connected to a power supply with a circuit breaker (FI switch 30 mA)
- the heating cables must not be shortened and should therefore already be ordered in the correct length
- remaining lengths can be wound around the pipe in coils (note that a coil spacing of at least 15 mm must be maintained here). 15 mm must be observed)
- do not bend the heating cable and observe the max. bending radius of approx. 50 mm
- the heating cables can be fixed to the pipe with insulating tape or with aluminium tape
- when used on plastic pipes, the pipe must be wrapped with aluminium tape before the heating cable is laid
- the pipe and the heating cable should be insulated with an insulation of min. 13 mm insulation
- the thermostat of the heating cable should be placed at the coldest position of the pipe
- the thermostat should be only moderately insulated
- do not use 230 V heating cables in the browsing area of animals
- installation must be carried out by a qualified specialist according to VDE0100